H+h HEATER

H+h HEATER ADVANTAGES

NEW - PROGRAMMING DAILY AND WEEKLY

WORKS WITH H+r REMOTE CONTROLLER

CONTROL OF WATER OR AMBIENT TEMPERATURE

LED DISPLAY

TURBO-BOOST FUNCTION (EASY DRYING, HEATING)

LEFT OR RIGHT SIDE POSSIBLE

DETACHABLE HEATING ELEMENT

ALL YEAR HEATING

ENERGY SAVING

EASY OPERATION

ABOUT H+h HEATER

H+h heater is designed for horizontal installation in aluminium radiators, cast iron radiator and steel tubular radiators. It can work separately (paired with H+R remote controller) or can be connected to Home+ system (work with H+P programmer)

From January 2018 H+h heater has additional feature: programming daily and weekly. So it meets all requirements of new EcoDesign 2018 for electric radiators.

Available casing colours (front side is always grey): white, chrome, satin chrome, anthracite, steel.

Other colours are available upon request.

Available outputs: 300W, 600W, 900W, 1200W, 1500W (3/4″) and 2000W (3/4″)

H+h heater is available in 2 versions (standard and short):

STANDARD VERSION – for aluminium radiators (with 1″ connection, reduction to 1/2″ or 3/4″)
SHORT VERSION – for cast iron radiators and tubular steel column radiators (with 5/4″ connection, reduction to 1/2″ or 3/4″) – see photo below

H+H_connections_3 H+H_connections_11

H+h heater require a proper diameter (minimum 20mm) of collector where a heating element (L) will be placed. Please also check a lenght of a collector (Lg). It should be minimum 50mm longer than a lenght of a heating element

Hh_przekroj

H+h heater requires RCD protection with rated residual operating current not exceeding 30mA. The equipment must be connected to circuit protective conductor (earth).

Heaters general characteristics:

work medium: water or water/glicol mixture
working temperature: 0-65 C (for ambient temperature 10-30 C)
voltage: 230V
electric connection: Unischuko plug with coiled cable or 900mm cable ready for hard wiring
assembled with: flange ½” or ¾” (for 1500W and 2000W)
IP54

Material characteristics:

protective tube: copper
flange: brass

Tube and flange: chromium-plated

insulation: MgO (magnesium oxide)
heating coil: Kanthal wire
regulator: electronic

For our other models for horizontal installation please check our website www.heatpol.com

INSTALLATION

How to match heater to your radiator’s output:

Water content [l]		Radiator output [W]		Recommended heater [W]
min	max	min	max	output [W]	heating element lenght [mm]
1,5 3 4,5 7,5 8,5 10	3 4,5 7,5 8,5 10 18	– 350 500 700 900 1050	350 550 850 1050 1300 1800	300 600 900 1200 1500 2000	340 390 440 470 520 570